Goblin V2 Donor Parts

Revision date: 1/31/2025

This list is subject to change as we continue to develop the production version of the Goblin V2.

Parts You WILL Need

engine
- intact intake manifold
- throttle body
- turbocharger
- coil packs
- all hoses
transmission
- transmission breather hose and box (not standard on all transmissions)
powertrain harness
ECM (engine control module)
fusebox
battery tray
air filter box
- lower and upper portion of the air filter box
air intake pipe from filter to turbo
charge pipe from turbocharger to intercooler
charge pipe from intercooler to throttle body
coolant tank
pendulum mount

main/body harness
- save all harnesses on the car except those attached to the dash
electrical modules
- there are many modules throughout the interior of the car that are required to start the car
- keep every module you find
accelerator pedal
fuel pump
- can be removed from inside of the car after removing the rear seat
fuel pump control module
- this is mounted to the frame of the car above the fuel tank
- you can get to it from the same spot you remove the fuel pump
gear selector/shifter
ignition switch
- required if you are using the standard key setup to start the Goblin
gauge cluster
push button starter
- we aren't sure how easy it will be to reuse starter button but save it if your donor has it

front control arms
front struts and springs
front knuckles
front bearing hubs
inner tie rods
outer tie rods
wheels (the Goblin kit comes with 5x114.3 bearing hubs that won't work with the VW 5x112 wheels)
brake calipers
rotors

You will not need any of the rear suspension or brake pieces.